-Built-in Godox 2.4G Wireless X system
Optical & 2.4G wireless transmission offer even and stable output.
With built-in Godox 2.4G wireless X system, TT600S is compatible with AD360II-C/AD360II-N/TT685C/TT685N/X1T-C/X1T-N,etc.
In the 2.4G Wireless transmission mode, when used as a slave unit, TT600S can set its group as A/B/C/D/E. There are 1~32 channels to be chosen.
Utilizing Godox 2.4G wireless X system, TT600S can be triggered and controlled by only a X1T-C or X1T-N X1T-S transmitter(Sold separately).
TT600S can achieve 1/8000s high-speed sync functions when using in combination with high-speed triggers.e.g. Godox Cells II transceiver, X1 TTL wireless flash trigger,etc.
(Note: High-speed sync triggering mode is not available when TT600S is mounted onto the camera.)
Equipped with a wireless control port and a 3.5mm sync cord jack, TT600S has multiple triggering methods.
GN60(m ISO 100,@105mm), 22 steps of power output(1/1~1/128).
Approx.0.1~2.6s recycle time, 230 full power flashes(using 2500mAh Ni-MH batteries.)
Support M/Multi/S1/S2 modes,20-200mm auto/manual zooming.
With C.Fn custom function settings, focus assist lamp. buzz button,over-temperature protection,etc.
-Convenient LCD Panel
With high-resoluction LCD panel to offer clear and easy operation.
Turn the select dial to choose the amount of the settings.
Godox TTL wireless flash trigger X1T-S applies to S0ny DSLR cameras with MI Shoe. Featuring multi-channel triggering, stable signal transmission, and sensitive reaction, it can be used to trigger camera shutter, studio flash and camera flash
Compatible with: S0ny cameras; Support for the cameras that have PC sync socket
Build-in Remote System: 2.4 G wireless transmission
Modulation Method: MSK
Power Supply: 2*AA batteries
Manual Flash: Yes
TTL Auto Flash: TTL
Multi flash: Yes
High Speed Sync (HSS): Yes
Flash Exposure Compensation (FEC): Yes, ±3 stops 1/3 stop increments
Flash Exposure Lock (FEL): Yes
Focus Assist: Manual open
Second Curtain Sync: Yes (Setting on the camera)
Controlled Slave Groups: Max 5 group (A/B/C/D/E)
Transmitter Distance: >100 meters
Channel: 32 channels
Synchronization Delay Set: Yes (0-10ms, set in unit of 100us )
Modeling Flash: On/ Off
Zoom Setting: Adjust the flash's focal length through the transmitter
Display Panel: Wide LCD panel, backlight on/off
Output Interface: Transmitter: use a PC port to input and output
Firmware Upgrade: Use the Micro USB port to upgrade
Memory Function: Settings will be stored 2 seconds after last operation and recover after a restart.
Transmitter Size/ Weight: 72x75x52(mm)/90g